19-23 RAM 2500 3.25" HEMI BACKCOUNTRY 2.0 SYSTEM

19-23 RAM 2500 3.25" HEMI BACKCOUNTRY 2.0 SYSTEM

Brand: Carli Suspension

SKU: CS-DBC20-19-H

Signature Shock Tuning for the 2019 Hemi Equipped Ram trucks. 2.0″ Remote Reservoir Shocks provide users with a comfortable, entry-level off-road capability paired with a controlled, vastly improved on-road ride.

Shock Diameter - 2.0"
Lift Height - 3"
Tire Size - UP TO 37"
Front Travel - 9.6"
Rear Travel - 11"

Base Kit Includes:

A “Base Kit” SKU must be accompanied by the SKU of a Sway Bar option to form a complete system.

 Does not work with rear auto-level air suspension.

Kit Options:

Sway Bar Options

Front Sway Bar Drop Brackets +$
SKU: CS-DSBD-14

3in Torsion Sway Bar +$
SKU: CS-DTSB3-14

ADD Steering Stabilizer

Stainless Low Mount Stabilizer, 2014+
SKU: CS-DLMSS-14

High Mount Stabilizer, 2014-18 | + $

SKU: CS-DHMSS-14

ADD Fabricated Radius Arms

Fabricated Radius Arms +$
SKU: CS-DFRA-14

ADD Front Diff Guard

Front Differential Guard + $
SKU: CS-DFDG-14

ADD Lifetime Ball Joints

Description:

The Backcountry 2.0 system is designed for people seeking the best ride on and off-road on a budget; perfect for those that want to have a little dirt-road fun in their 8,500lb truck without losing the on-road ride quality or usability for which the truck was designed. You’re no longer limited to the highway while gravel roads become uninteresting as you can drive them at speed with one hand on the wheel. Utilizing Fox 2.0” Remote Reservoir Shocks, we’ve developed a shock tune that delivers all around comfort and ride quality designed for on-road, in town, highway, towing/hauling as well as slow to mid speed off road use. The Fox 2.0s boast extruded aluminum construction with a clear anodizing for corrosion resistance, are fully rebuildable and are built with hour-glass bushings in the rod-ends. Fox builds these shocks with their legendary red shock oil that flows well down to -55* F.

The Details:

Your truck will sit 3”-3.5” higher in the front (cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted 1”-1.5” via Carli’s progressive coil springs.

When pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, we offer two options; Billet Sway Bar Drop Brackets or the replacement Torsion Sway Bar. The Billet Drop Blocks shift the sway bar down and forward to ensure the factory end links cycle properly throughout the entire extended travel range. Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension.

Wheel and Tire:

This system will fit up to a 37” tire when utilizing wheels that are no more than 9” wide with 5.75-6” of backspacing. A 12.5” wide should fit with no rubbing on the factory radius arm and only minor trimming required, while a 13.5” will require more trimming and slightly more offset to fit properly. 35” tires will fit with VERY minimal, if any trimming. We Recommend running an 18” diameter wheel for optimal ride quality (more rubber = better small bump compliance) on a 35”-37” E-rated tire running 45psi front, 40psi rear when unloaded. For more details, see our article on wheel and tire selection and tire pressures

System Notes:

Wheels - Carli Recommends a 18" Wheel, no more than 9" wide with 5.25-5.75" of Backspacing.

Tires - 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R

Recommended Configuration - Carli Leveling Systems are Designed and Tested on Vehicles with 18" Wheels with 35", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.

End Links - Factory front endlinks are retained where as the rear endlinks are provided with the kit for cleaner travel.

Torsion Sway Bar - Selection of the Torsion Sway Bar Replacement will not use front sway bar drops.

Fitting 37" Tires - 37" Tires will fit with the above wheel specifications. Radius arms are not required but will offer more clearance for those wanting to run smaller offsets.

Fitment:

Part No.: CS-DBC20-19-H
Vehicle Year - 19+
Model - 2500
Engine - Hemi
Lift Height - 3"