14-18 RAM 2500 POWER WAGON 2" COMMUTER 2.0 SYSTEM

14-18 RAM 2500 POWER WAGON 2" COMMUTER 2.0 SYSTEM

Brand: Carli Suspension

SKU: CS-DC20-14-H

Carli Signature Tuned 2.0″ Remote Reservoir Shocks provide users with a comfortable, greatly improved on-road ride and entry level off-road capability. This system is the beginning of the Utilitarian suspension lineup.

Shock Diameter - 2.0"
Lift Height - 1"
Tire Size - UP TO 37"
Front Travel - 9.6"
Rear Travel - 11"

Base Kit Includes:

Kit Options:

Sway Bar Options

3in Torsion Sway Bar +$
SKU: CS-DTSB3-14

ADD Steering Stabilizer Option

Stainless Low Mount Stabilizer, 2014+ | + $
SKU: CS-DLMSS-14

Fabricated Radius Arms

Fabricated Radius Arms +$
SKU: CS-DFRA-14

ADD Front Diff Guard

Front Differential Guard
SKU: CS-DFDG-14

ADD Lifetime Ball Joints

Lifetime Ball Joint Set, 2014
SKU: CS-DBJP-14 

 

Description:

The Commuter 2.0 system is designed for people seeking the best on-road ride quality on a budget. Utilizing front and rear Fox 2.0” internal reservoir shocks, we’ve spent a significant amount of time developing a Carli Signature shock tune that delivers all around comfort and ride quality designed for on-road, in town, highway, and towing/hauling for the Power Wagon Platform. These shocks are fantastic for the low-speed off-road for which Power Wagons are known. The Fox 2.0s are fully rebuildable, built with hour-glass bushings and boast extruded aluminum construction with a clear anodizing for corrosion resistance. Fox builds these shocks with their legendary red shock oil that flows well down to -55* F.

The Details: Your truck will sit 1” higher in the front (cab configuration dependent) with a touch more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear Carli Coil Springs will drop by ½”-1”  to level the truck while upping the rear suspension capacity to a respectable 2,000lbs.

The Factory Sway Bar Disconnect with which the Power Wagons are equipped works great for those wanting the two ends of the spectrum, rigid or flexy. For those wanting to land in the middle of the spectrum between these two end points, Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension when compared to the locked, factory sway bar. The Carli Sway Bar allows nearly bind-free articulation in low-speed applications; when things heat up, it allows the Carli Shocks and springs to breath while engaging progressively to provide control in high-speed cornering situations.

Wheels and Tires: This system will fit up to a 37” tire when utilizing wheels that are no more than 9” wide with 5.75-6” of backspacing. A 12.5” wide should fit with no rubbing on the factory radius arm and only minor trimming required, while a 13.5” will require more trimming and slightly more offset to fit properly. 35” tires will fit with VERY minimal, if any trimming. We Recommend running a 17”/18” diameter wheel for optimal ride quality (more rubber = better small bump compliance) on a 35”-37” E-rated tire running 45psi front, 40psi rear when unloaded. For more details, see our article on wheel and tire selection and tire pressures:

Fitment:

Part No.: CS-DC20-14-PW
Vehicle Year - 14-18
Model - 2500
Engine - Power Wagon
Lift Height - 1"