03-09 RAM 2500/3500 LEVELING SYSTEM, BASE, DIESEL

03-09 RAM 2500/3500 LEVELING SYSTEM, BASE, DIESEL

Brand: Carli Suspension

SKU: CS-DLEVEL-03-D

3" front lift that delivers 50% more suspension travel than the stock Ram. Blueprinted coils paired with extended travel shocks increase control and comfort without breaking the bank.

Shock Diameter - 2.0"
Lift Height - 3"
Tire Size - Up To 35"
Front Travel - 10"

Base Kit Includes:

A “Base Kit” SKU must be accompanied by the SKU of a Sway Bar to form a complete system.

Kit Options:

Sway Bar Options

3in Extended Sway Bar End Links +$ (Not For Power Wagons)
SKU: CS-DEL-985

3in Torsion Sway Bar +$
SKU: CS-DTSB3-03

Add Adjustable Track Bar

Adjustable Trackbar +$
SKU: CS-DPRB-03

Add Control Arms

Extended Control Arms +$
SKU: CS-CA-MS-03

High Clearance Extended Control Arms +$
SKU: CS-DFCA-03

Add Steering Stabilizer

Low Mount Stabilizer, Y-Style +$
SKU: CS-DLMSS-Y

Low Mount Stabilizer, T-Style +$
SKU: CS-DLMSS-T

High Mount Stabilizer, Y-Style +$
SKU: CS-DHMSS-03-Y

High Mount Stabilizer, T-Style +$
SKU: CS-DHMSS-03-T

Opposing Mount Stabilizer, Y-Style +$
SKU: CS-DSSOSK-Y

Opposing Mount Stabilizer, T-Style +$
SKU: CS-DSSOSK-T

Description:

The Leveling System was designed for people seeking a leveled vehicle with more performance and ride quality than a generic spacer lift. The IFP Bilstein 5100 shocks offer a nice boost in ride quality and carry a lifetime warranty through Bilstein.

The Details:

Your truck will sit 2.5”-3” higher in the front (year/cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The included, front, Bilstein 5100 shocks are longer to accommodate the extended travel and are tuned by Bilstein for increase the suspension control in the Ram platform. When pairing added down-travel with the taller ride height, the position of the factory sway bar will need to be altered as well. For this, we offer two options (unless 1994-2002, then there’s only one); extended, Sway Bar End Links or the replacement Torsion Sway Bar. The End links are equipped with ½” FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement point. Factory pillow-bushings are re-used to assemble the sway bar to the lengthened link. Carli’s Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings.

Wheel and Tire:

This system will fit up to a 35” tire with stock control arms (we recommend purchasing our extended, Mild Steel Control Arms) on wheels with 5.75-6” of backspacing. If running factory wheels, we recommend an All Terrain 35” tire to avoid rubbing. For 37” tire fitment, our High-Clearance Control Arms and Adjustable Track Bar can be paired to a wheel with 5.75” of Backspacing. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures:

System Notes:

Wheels - Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5.75" of Backspacing on Leveling Systems

Tires - 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R

Recommended Configuration - Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 35", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.

Torsion Sway Bar - Selection of the Torsion Sway Bar Replacement will not Require size selection as the entire sway bar assembly is replaced.

Fitment:

Part No.: CS-DLEVEL-03-D
Vehicle Year - 03-09
Model - 2500/3500
Engine - Hemi, Diesel
Lift Height - 3"