08-10 FORD F250/F350 4.5" DOMINATOR 3.0 SYSTEM, BASE, DIESEL
Description
Description
08-10 FORD F250/F350 4.5" DOMINATOR 3.0 SYSTEM, BASE, DIESEL
Brand: Carli Suspension
SKU: CS-F45-D30-08
The most travel, softest on-road ride and the second most off-road capability combine to make this the ultimate utilitarian setup in our 4.5" height range. This system options full leaf springs and Fabricated Radius arms are recommended.
Shock Diameter - 3.0"
Lift Height - 4.5"
Tire Size - Up To 37"
Front Travel - 10.5"
Rear Travel - 13"
Front Lift - 4.5"
Rear Lift - 3.5"
Base Kit Includes:
CS-FMRC-05 | Multi-Rate Coils |
CS-FD30SPKG-45-05 | Carli Custom Tuned KING 3.0" Remote Reservoir Shocks, Front and Rear with Stainless Shafts & Reservoir Mounts |
CS-FFCB-08 | Fabricated Coil Buckets |
CS-FRSM-08 | Fabricated Rear Shock Mounts |
CS-FORDBBL-08 | Brake Lines |
CS-FRAD-05 | Radius Arm Drops |
CS-FBDF-05-4.5-SHORT | Dominator Bump Stop Drops |
CS-FCASTERSHIM-4.5 | 1° Caster Shims |
CS-FPRB-05 | Track Bar |
A “Base Kit” SKU must be accompanied by the SKU of a Sway Bar and Leaf Spring option to form a complete system.
Kit Options:
ADD Sway Bar Options
08-10 Sway Bar End Links +$
SKU: CS-FEL-08
ADD Rear Leaf Options
Full Spring Pack +$
SKU: CS-FFSP-08
ADD Radius Arm Option
Radius Arms for 4.5in Lifts +$
SKU: CS-FARA-45-05
ADD Carrier Bearing Drop
Carrier Bearing Drop +$
SKU: CS-CARRIERDROP-F
ADD Steering Stabilizer
High Mount Steering Stabilizer +$
SKU: CS-FHMSS-08
Low Mount Steering Stabilizer +$
SKU: CS-FLMSS-05
ADD Long Travel Airbags
Long Travel Air Bags +$
SKU: CS-FLTB-08
Description:
This is the true, Jack of all trades suspension system offering the most wheel travel of any Carli system. The Dominator rides better than any other system on the road while boasting off-road manners to rival the Coilover Bypass. No tubes to adjust or user-tunability in this system; we’ve done the hard work for you.
The truck will sit 4.5” higher in the front and have more wheel travel thanks to the taller, Progressive Rate Coil Springs that mount into the Fabricated Carli Spring Buckets. Radius Arm Drop Brackets reset the pivot point and keep the travel linear for the best ride while Sway Bar Links or Drop Brackets reset the sway bar engagement point. The included Bump Stop Drops protect the shocks from over-compressing while the Adjustable Track Bar centers the front axle and Stainless Brake Lines firm up braking and ensure there is enough line for the newfound travel. To round off the front end, we include Caster Shims to tighten the steering.
The rear is outfitted with a Full Progressive Spring Pack requiring no block to achieve proper ride height; thus, travel is extended and wheel hop/axle wrap minimized at the cost of 15% less load capacity than a stock F250. If capacity is a concern, we offer Long Travel Airbags to restore the payload capacity to that of a SRW F350.
This system boasts Carli Signature tuned, King 3.0” Remote Reservoir shocks so large, we needed to fabricate custom mounts to fit them; as the old adage goes, there’s no replacement for displacement. The 3.0” shock has a piston surface area 45% greater than a 2.5” King and 126% larger than a factory 2.0” shock making it far more efficient in all situations. The massive surface area also ensures we can achieve amazing off-road performance while offering the best on-road ride of any of our systems. To fit these shocks, we provide fabricated mounts that lift the upper mounting point and position the shock away from the frame while the standard bump stop extensions were shortened to allow for more up-travel to compliment the additional down-travel from the longer shock. In an effort to provide customers with the best product, we designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; we then tuned the shocks based on seat-of-the-pants feel. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55° F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.