Carli - RAM 2500/3500 3" Dominator 3.0 System, Diesel 10-13
Description
Description
CARLI Suspension - Dodge 3" Dominator 3.0 System, Diesel, 2010-2013 Base Kit
SKU: CS-DD30-10-D
3.0" King Remote Reservoir Shocks pair with the included Full Progressive Leaf Pack to deliver a soft, yet controlled on-road ride quality with substantially more bottom out capability than the Pintop 2.5. The Dominator System was blueprinted and built with the avid off-roader in mind.
Shock Diameter - 3.0"
Lift Height - 3"
Tire Size - Up To 37"
Front Travel - 10"
Rear Travel - 12"
Base Kit Includes:
CS-DLRC-10-D - Linear-Rate Coils
CS-DD30SPKG-03-D - Carli Tuned King 3.0 Remote Reservoir Shocks, Stainless Shafts, Short Reservoir Mounts, Limit Straps
CS-DPRB-03 - Track Bar
CS-DFST475 - Fabricated Shock Tower
CS-D30GUSSET - Rear Gusset Kit
CS-HOLESAWKIT-4.5 - 4" Hole Saw and Arbor
Kit Options:
Sway Bar Options
10mm Extended Sway Bar End Links +$ (not for Power Wagons)
SKU: CS-DEL-10-10mm
12mm Extended Sway bar End Links +$ (not for Power Wagons)
SKU: CS-DEL-10-12mm
Torsion Sway Bar +$
SKU: CS-DTSB3-03
Rear Leaf Options
Diesel Full Spring Pack +$
SKU: CS-DFSP-10-D
Diesel Heavy Duty Full Spring Pack +$1,955.00
SKU: CS-DFSP-10-HD
Add Long Travel Air Bags
Long Travel Air Bags +$
SKU: CS-DLTB-03-4.0
Dodge 2012-2013 Long Travel Air Bags, Diesel + $
SKU: CS-DLTB-12-D
Add Control Arms
Extended Control Arms +$
SKU: CS-CA-MS-10
High clearance Extended Control Amr's +$
SKU: CS-DFCA-10
Add Steering Stabilizer
Low Mount Stabilizer, T-Style +$
SKU: CS-DLMSS-T
High Mount Stabilizer, T-Style +$
SKU: CS-DHMSS-03-T
Opposing Mount Stabilizer, T-Style +$
SKU: CS-DSSOSK-T
Add Rear Shock Mount - Driver
Rear Shock Mount, Driver, 2003-12 | +$
SKU: CS-DRSMD
Add Rear Shock Mount - Passenger
Rear Shock Mount, Passenger, 2003-12 | +$
SKU: CS-DRSMP
Add Axle Truss
Front Axle Truss - AAM 9.25 | +$
SKU: CS-AAMTRUSS
Add Front Hydro-Bump Kit
Hydro-Pneumatic Front Bump Stops, 3" Lift | +$
SKU: CS-DHYDRO-F
Description:
This is the true, Jack of all trades suspension system offering the most on-road comfort of any short-arm system in the Carli lineup. The Dominator rides better than any other system on the road while boasting off-road manners that make the truck feel half its size. This is the end of our “all-around” Suspension Systems; anything above the 3.0” King will sacrifice on-road ride for off-road capability. For the customer looking for the best balance of on and off-road capability, without leaning too far in either direction, wanting to maintain the factory short arms (ability to return to stock), this system is the perfect candidate.
The Details:
The Dominator is the best of our short-arm, utilitarian style offerings boasting front Carli Signature tuned, King 3.0” remote reservoir shocks so large, we needed bore the factory spring buckets for them to cycle properly. As the old adage goes, there’s no replacement for displacement. In an effort to provide customers with the best product, we do not sell off-the-shelf King 3.0s. We designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; we then tuned the shocks around the custom pistons based on seat-of-the-pants feel.
Wheel and Tire:
This system will fit up to a 37” tire with our High Clearance Control Arms and Full Progressive Leaf Springs on wheels no more than 9” wide with 5.75” of backspacing. If running factory control arms or wheels; we recommend an All Terrain 35” tire. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures:
System Notes:
Wheels - Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5.75" of Backspacing on Leveling Systems
Tires - 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R
Recommended Configuration - Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 37", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.
Endlinks - 2010-present vehicles have 2 possible sizes of Sway Bar End Links. Place a socket on the nut that compresses the rubber End Link bushings; fitment of an 18mm socket will indicate the need for the 12mm Extended End Link.
Torsion Sway Bar - Selection of the Torsion Sway Bar Replacement will not Require size selection as the entire sway bar assembly is replaced.
Fitting 37" Tires - 37" Tires will fit with the above wheel specifications if the system is equipped with Full Replacement Leaf Springs and Control Arms.
Rear Bypasses - Selection of Rear bypass shocks carries a lead time of 6-8 weeks from order date.
Fitment:
Vehicle Year - 10-13
Model - 2500/3500
Engine - Diesel
Lift Height - 3"
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.