Prerunner Kit - Steel | 14+ Chevy Silverado 2WD

Baja Kits Prerunner Suspension Kit excels in the dirt while retaining excellent on-road handling and comfort. The kit is a direct bolt-on to your 2WD Chevy Silverado. Engineered to be a complete mid travel suspension system, it uses Trophy Truck grade uniballs and hardware on both the Upper and Lower arms. Heavy duty fabricated steel arms handle the abuse while custom tuned King coilover shocks with remote reservoirs and compression adjusters for precise tuning handle suspension damping. (Rear kits available too).

The Baja Kits Advantage:

• CAD designed boxed UCA
  
• Our custom Hi-Density Custom Bushings with grease fittings offer industry leading durabilty and a quiet, no squeak ride
  
• 1" Hi angle Trophy Truck grade uniball's replace the weak stock ball joints that fail under high angles and loads seen from normal offroad use
  
• Our CNC machined corrosion resistant misaligns have a tapered snout to adapt your stock upright/spindle with ease
  
• We've increased the caster angle that you lose when lifting a truck with stock arms to regain on road stability, handling and alignment
  
• Easy Install, NO welding, able to be put back to stock

Technical Specs:

• Track Width 2.5" wider per side (5" wider total)
  
• Wheel Travel 11" when used with our Custom King Shock
  
• Lift - 3 - 4"

Product Requirements:

• Shocks - After market OE style bolt in 2.5 or 3.0 shocks will fit this kit. For Maximum travel use our Custom built King 2.5" shock (options above)
  
• Tire Size - 35" or 37"
  
• Wheel Size - 17" rim with 4.75" max backspacing
  
• Fenders - Fiberglass fenders needed for 35" tires seeing offroad use and for all application with 37" tires.
  
  **ATTENTION** You may run 35" tires with stock fenders for mild use ONLY. 35" tires will clear under normal driving conditions and WILL contact your stock fender at full compression (AKA jumping the truck, hitting bumps or driveways at speed) The owner accepts the risk of damaging the stock fenders in this scenario.
  
  

Parts Included:

**Kits come pre assembled and ready for install, as seen in product photos**

Boxed Upper Arms

• Baja Kits Badges & Rivets
  
• Hi-Density Custom Bushings
  
• Crush Sleeves
  
• Zerk fittings
  
• 1" Uniballs
  
• Countersunk Top Misaligns & 12 point bolts
  
• Heat Treated Tapered Misalign Adapters

Boxed Lower Arms

• Baja Kits Badges & Rivets
  
• Hi-Density Custom Bushings
  
• Crush Sleeves
  
• Zerk fittings
  
• 1" Uniballs
  
• Countersunk Top Misaligns & 12 point bolts
  
• Heat Treated Tapered Misalign Adapters
  

Additional Items

• Brakelines, Fittings,Adapters and Copper Washers
  
• CNC Steel Steering Extensions
  
• Coil Bucket Shock Adaptor (Only included with the custom built King 2.5" shock)
  
• Install Guide
  
• Baja Kits Sticker pack

Install Information:

• Level 2 Install, Bolt on with drilling &/or minimal grinding
  
• Install Time: 8 hours (Times will vary depending on knowledge and skill level)