Hamilton Cams 1989-2018 Dodge/Ram 2500/3500 5.9L/6.7L Cummins 188/220 Cast Camshaft
Can I pick up my order or have it installed at your shop?
Can I pick up my order or have it installed at your shop?
Absolutely. We offer local pickup on most products and full professional installation at our shop in Washington, MO. Whether you just want to grab your parts or have our techs handle the install, we’ve got you covered. Give us a quick call at 636-429-7020 or message us to schedule a visit — we’ll make sure the parts are ready when you arrive.
How do I know if this part fits my vehicle?
How do I know if this part fits my vehicle?
Unsure if it’ll fit? No problem — that’s what we’re here for. Send us your vehicle’s year, make, and model, and we’ll verify fitment before you order. We can also point you toward compatible upgrades or supporting parts if needed.
What if I need to return a product or it’s defective?
What if I need to return a product or it’s defective?
Most unused items can be returned within 30 days in their original packaging. Some products are covered by a manufacturer’s warranty as well. If something arrives damaged or doesn’t meet your expectations, just let us know — we’ll help you get it replaced, refunded, or repaired. (Tracking updates are also emailed automatically once your order ships.)
What's the lead time on custom or fabricated parts?
What's the lead time on custom or fabricated parts?
Many of our parts are built to order — especially fabricated or performance components. These can take additional time to produce before shipping. Lead times vary by manufacturer and demand, but we’ll always keep you updated along the way. If you’re working on a tight schedule, reach out before ordering at 636-429-7020 and we’ll confirm current availability or estimated ship dates.
For the daily driver that sees the occasional weekend event, the Hamilton Cams 188/220 Cast Camshaft fits 1989–2018 5.9L/6.7L Cummins engines with a 1,700–4,500 RPM operating range, EGT drops of 200-300 and 40-60hp gains seen depending on fueling and turbo.
Why Choose the Hamilton Cams 188/220 Cast Camshaft?
- Daily-driver friendly – Intended for daily-driver and light-competition Cummins builds.
- Cast construction – No cam tunnel bushings called for, unlike the steel version.
- Cooler EGT – Drops EGT 200-300.
- Proven gains – 40-60hp seen, depending on fueling and turbo.
- Broad coverage – One grind across 12-valve, 24-valve, 5.9L common-rail and 6.7L Cummins application groups.
Fitment Notes
- 12v “drop in”: no more than .018″ piston protrusion and at least .055″ valve face depth with a standard head gasket and a 99 intake centerline.
- 24v “drop in”: no more than .018″ piston protrusion and at least .038″ valve face depth with a standard gasket.
- Short on piston-to-valve clearance? Run an oversize head gasket or cut valve reliefs.
- Although considered a drop-in cam, it is important to check clearances.
- Hamilton always recommends new lifters when changing a cam.
Installation Highlights
Apply a liberal amount of quality assembly lube to the cam and do not let the engine start without oil pressure. On a new engine, lube the oil pump and prime the filter. Disconnect fuel and spin the engine on the starter until oil pressure reads or oil reaches the rocker arms, then start it and bring it up to operating temp. Re-torque or hot-torque the head before adjusting valves — set lash last — and change the oil after break-in.
Fits These Models
- 1989–1998 12-valve Cummins
- 1998.5–2002 5.9L 24-valve Cummins
- 2003–2007 5.9L common-rail Cummins
- 2007.5–2018 6.7L Cummins
Specifications
- Duration at .050″ of lift: 188 Intake, 220 Exhaust
- RPM Range: 1700-4500
- Construction: Cast
Notes
- Hamilton only offers warranty on its cams if Hamilton lifters and springs are used.
- Approved oil required: 15W-40 (or 5W-40 in sub-zero conditions) with adequate zinc, phosphorus and molybdenum. Thin or low-additive oils don’t provide the shear strength a flat tappet needs.
- Approved oils: Valvoline Full Synthetic 15W-40, Valvoline Synthetic Blend 15W-40, Valvoline All-Terrain 15W-40, Schaeffer’s 15W-40, Mobil Delvac Extreme 15W-40, LIQUI MOLY Touring High Tech 15W-40, Driven Racing Oil 15W-40, Redline 15W-40.
- Acceptable: Shell Rotella T6 Full Synthetic 15W-40, Shell Rotella T5 15W-40.
SKU: 07-C-188/220S-1
Questions? We’re Here to Help.
Have questions about upgrades for your Cummins? Contact FASS Motorsports and we’ll get you dialed:
Phone: 636-429-7020
Email: info@fassmotorsports.com
This part fits the following vehicles:
| Years | Make & Model |
|---|---|
| 1989–1993 | Dodge D250 |
| 1989–1992 | Dodge D350 |
| 2011–2018 | Ram 2500 |
| 2011–2018 | Ram 3500 |
Fitment is listed by year, make and model. Some applications also depend on cab, bed, drivetrain or engine — if you are not sure, call 636-429-7020 or send us your vehicle details and we will confirm before you order.
