14-23 RAM 2500 3" DOMINATOR 3.0 SHOCK PACKAGE, DIESEL

The Dominator represents the top offering in Carli’s lineup, featuring Carli Signature-tuned King 3.0” remote reservoir shocks engineered to cycle properly with reinforced front and rear mounting systems. Carli designed custom pistons to establish correct base flow rates, tuning each shock for the heavy-duty truck platform. The shocks are finished with shafts machined and polished from solid 17-4 stainless steel, eliminating the need for coatings and providing durability against weather, wear, and minor surface damage.

At the front, the shocks mount with a large Pintop Bushing at the factory location. Carli includes 1/4″ boxed lower shock mounts to replace the weaker stamped factory versions. These weld-in mounts index off the radius arm bracket to ensure strength and clearance. Extended stainless brake lines and routing brackets relocate the factory lines for proper clearance, while weld-in coil isolator supports correct factory shortcomings by strengthening the coil bucket and keeping the springs secure under heavy use.

Isolator Note: Ram trucks may use one of two isolators: Standard 2500/3500 (PN 05168566AB) or Power Wagon (PN 68268825AA). Standard isolators must be installed when welding in Carli isolator supports, as they fit the required dimensions.

In the rear, the shocks are relocated outside the frame pocket by welding replacement upper mounts to the tubular frame crossmember. The lower mount bolts into the factory bracket using existing holes, extending forward and outward to align with the new upper position while maintaining tire clearance. Because this relocation alters the bed support, Carli includes a bolt-in bedside brace that ties into the control arm bracket. An e-brake routing bracket with P-clamps is also supplied to keep the cables clear of the shocks.

This system provides everything needed to properly install 3.0” shocks on 2014+ Ram 2500 trucks already equipped with a Carli Commuter, Backcountry, or Pintop system.

• Carli custom-tuned King 3.0″ remote reservoir shocks
• 17-4 stainless steel shock shafts, machined and polished
• Includes front and rear shocks
• Coil-mounted short reservoir brackets
• Front lower weld-in shock mounts
• Rear upper weld-in shock mounts
• Rear lower bolt-in shock mounts
• Rear bedside brace and e-brake relocation hardware
• Front upper weld-in coil isolator supports
• Front stainless brake line kit
• Fitment: 2014+ Ram 2500 4×4, Diesel
• Compatible only with Carli 3.25″ front springs & 0–2″ rear lift
• Not compatible with auto-leveling air suspension