6-Inch Lift Kit w/ Radius Arm - FOX 2.5 Performance Elite Coil-Over Conversion for 2011-2016 Ford F-250/F-350 Super Duty 4WD Diesel

Transform your 2011-2016 Ford Super Duty F250 and F350 diesel truck with this powerful 6-inch lift kit, featuring a FOX Performance Elite coil-over conversion from BDS. Elevate your stance, performance, and capabilities with this all-inclusive kit that effortlessly accommodates up to 37" tires. 

Complete with diesel-specific FOX 2.5 coil-over shocks, heavy-duty radius arms, a forged drop pitman arm and track bar bracket for precise steering, sway bar relocation, brake line brackets, and custom-tuned secondary FOX 2.0 shocks up front.

In the rear, experience the smooth ride from the replacement Glide-Ride leaf springs with integrated overload leaf, secured with u-bolts and brake line brackets, and enhanced with a matching set of NX2 Nitro or FOX Performance shocks. Take your truck to new heights with this exceptional lift kit.

 

FOX Performance Elite Coil-Over

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

BDS Glide-Ride Leaf Springs

Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design where the main leaf pack is broken into two stages:

1. First, the primary three leafs are functional with no additional load in the vehicle for excellent everyday ride quality. As moderate loads are applied, the secondary leafs are engaged.
2. Second, if the truck is fully loaded, the bottom overload is engaged for maximum hauling capacity. This setup allows your truck to maintain ride quality unloaded without sacrificing payload.

Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.