10-13 RAM 2500/3500 3" PINTOP 2.5 SYSTEM, BASE, DIESEL

10-13 RAM 2500/3500 3" PINTOP 2.5 SYSTEM, BASE, DIESEL

Brand: Carli Suspension

SKU: CS-DPT25-10-D

Our most popular system, the Pintop kit boasts 2.5", Remote Reservoir King Shocks. Designed and tuned in house for the customer looking for substantial on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than the Backcountry.

Shock Diameter - 2.5"
Lift Height - 3"
Tire Size - Up To 37"
Front Travel - 10"
Rear Travel - 10.6"

Base Kit Includes:

A “Base Kit” SKU must be accompanied by the SKU of a Sway Bar and Leaf Spring option to form a complete system.

Kit Options:

Sway Bar Options

Extended Sway Bar End Links, 0-3" Lift, 10mm +$
SKU: CS-DEL-10

Extended Sway Bar End Links, 0-3" Lift, 12mm +$
SKU: CS-DEL-10-12MM 

3in Torsion Sway Bar +$
SKU: CS-DTSB3-03

Rear Leaf Options

3in Diesel Add-A-Pack +$
SKU: CS-DPAP-03-D

Diesel, Full Progressive Leaf Spring Pack 2" Lift +$
SKU: CS-DFSP-10-D

Diesel, Heavy Duty, Full Progressive Leaf Spring Pack 2" Lift +$
SKU: CS-DFSP-10-D-HD

Add Control Arms

Extended Control Arms 2010-2013
SKU: CS-CA-MS-10

High Clearance Extended Control Arms 2010-2013
SKU: CS-DFCA-10

Add Long Travel Airbag

Dodge 2003-2011 Long Travel Air Bags, Diesel+$
SKU: CS-DLTB-03-4.0

 

Dodge 2012-2013 Long Travel Air Bags, Diesel+$
SKU: CS-DLTB-12-D

Add Steering Stabilizer

Low Mount Stabilizer, T- Style +$
SKU: CS-DLMSS-T

High Mount Stabilizer, T- Style +$
SKU: CS-DHMSS-03-T

Opposing Mount Stabilizer, T- Style +$
SKU: CS-DSSOSK-T

Description:

The Pintop is the Backcountry on steroids, take the description for the Backcountry and throw an exponent on it. This system is our most popular, all around suspension system. It was tuned and rides best with the Full Progressive Leaf Springs. The Pintop is a Jack-of-all-trades system from which every Ram owner would benefit. Raising the Ram platform then adding the 2.5” diameter shocks will support the argument that these trucks should come equipped with 2.5” shocks from the factory. The higher end systems will get you more off-road capability, yes, and even a bit more on-road. The premium paid for these systems, however, doesn’t compare to the on and off-road ride quality per dollar spent on the Pintop. For these reasons, it will likely remain our best seller for years to come.

The Details:

This system boasts Carli specific, blueprinted, King 2.5” shocks on all four corners. In an effort to provide customers with the best product, we designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; we then tuned the shocks around the custom pistons based on the only thing that matters to us, seat-of-the-pants feel. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55* F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.

Wheel and Tire:

This system will fit up to a 37” tire with our High Clearance Control Arms and Full Progressive Leaf Springs on wheels no more than 9” wide with 5.75” of backspacing. If running factory control arms or wheels; we recommend an All Terrain 35” tire. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures:

System Notes:

Wheels - Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5.75" of Backspacing on Leveling Systems

Tires - 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R

Recommended Configuration - Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 37", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.

Torsion Sway Bar - Selection of the Torsion Sway Bar Replacement will not Require size selection as the entire sway bar assembly is replaced.

Fitting 37" Tires - 37" Tires will fit with the above wheel specifications if the system is equipped with Full Replacement Leaf Springs and Control Arms