19-23 RAM 2500 POWER WAGON 2" PINTOP 2.5 SYSTEM, BASE

19-23 RAM 2500 POWER WAGON 2" PINTOP 2.5 SYSTEM, BASE

Brand: Carli Suspension

SKU: CS-DPT25-19-PW

Our most popular system, the Pintop kit boasts 2.5″, Remote Reservoir King Shocks. Designed and tuned in house for the customer looking for substantial on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than the Backcountry.

Shock Diameter - 2.5"
Front Lift Height - 2"
Rear Lift Height - 1"
Tire Size - UP TO 37"
Front Travel - 9.3"
Rear Travel - 11"

Base Kit Includes:

Kit Options:

ADD Sway Bar Options 

3in Torsion Sway Bar +$
SKU: CS-DTSB3-1419

Front Differential Guard

Front Differential Guard +$
SKU: CS-DFDG-14

ADD Radius Arms

Fabricated Radius Arms +$
SKU: CS-DFRA-LVL-14

ADD Radius Arms Options

Radius Arm Drop Brackets +$
SKU: CS-DRAD-1419

ADD Steering Stabilizer

Stainless Low Mount Stabilizer +$
SKU: CS-DLMSS-14

Stainless High Mount Stabilizer +$
SKU: CS-DHMSS-19

ADD Lifetime Ball Joints

Stainless Low Mount Stabilizer +$
SKU: CS-DBJP-14

This system is designed for the customer who refuses to keep the rubber on the tarmac and has an eye for quality and appreciation for bang-for-their-buck. At the heart of this system is a 2.5” lift, Linear Rate Coil Spring paired to matched travel King 2.5” Remote Reservoir Shocks that have been custom tuned, in house, for superior ride quality and handling both on-road and off. The rear piggyback reservoir shocks are also included with this system and have been custom tuned to maximize the ride quality of the factory rear coil springs. As the rear springs remain unmodified, load capacity is maintained while on and off-road handing and predictability are massively improved. For those that love the way their Ram tows from the factory but don’t want to be limited to a crawl when leaving the pavement, this is the perfect kit.

The Details: This system boasts Carli specific, blueprinted, King 2.5” shocks on all four corners. In an effort to provide customers with the best product, we designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; we then tuned the shocks around the custom pistons based on the only thing that matters to us, seat-of-the-pants feel. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55* F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.

**This system will NOT be upgradeable to any other Carli Suspension Systems.** It’s designed to be a solution for customers wanting a quality, big-shock system boasting huge off-road capability, minimal lift and NO reduction in payload or hauling capacity. We recommend slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops included. For this reason, customers may experience a slight bow in the coil spring. We did not experience a coil bow in any of our test trucks but it’s possible at the 2.5” lift height without a Radius Arm Drop Bracket. A Radius Arm Drop Bracket can be added to alleviate bow and recenter the caster adjustment if bow is encountered. This system will result in tight and responsive, sports-car like handling; the 3” Suspension Systems will ride softer in the rear given the included reduced capacity rear springs.